Saka zaren taɓa kai
302 jerin Metric Inch Saka zaren taɗa kai Don Ƙarfe da Filastik
302 jerin Metric Inch Saka zaren taɗa kai Don Ƙarfe da Filayen Filastik
◆Yana samar da zaren mata masu ƙarfi akan sassa masu laushi don ɗaukar gyare-gyare da yawa da buƙatu;
◆Za a iya gyara zaren ciki da suka lalace yadda ya kamata;
◆Ana amfani da hannayen hannu masu ɗaurin kai bayan mutuwar simintin gyare-gyare, gyare-gyaren allura, ko wasu hanyoyin masana'antu, don haka suna ba da izinin haɗakar samfuran da aka sauƙaƙe da ingantaccen amfanin gona;
◆Bushings na kai-da-kai na iya jure wa manyan kaya, don haka ana iya amfani da ƙananan abubuwan da aka saka, yana haifar da ƙirar samfura mafi ƙanƙanta.
302 jerin Sigar saka zaren taɓa kan kai
Sunan samfur | 302/303 jerin Saka zaren taɓawa kai |
Kayan abu | Karfe Zn/SUS303/Na musamman |
Launin saman | Galvanized/Launi na halitta |
Galvanizing: rawaya/blue/mai launi | |
Nau'in zaren | Abubuwan da aka bayar na Metric, Inc. UNC |
Lambar Samfura | M2-M24/Na musamman |
Aiki | Majalisar, haɗin zaren / ɗaure / juyawa |
Gwajin dogaro | Mechanical dimentions, gwajin taurin. gwajin jimrewar gishiri |
Teburin ma'auni don shigar da zaren zaren kai-tsaye
Girman awo Nau'in 302 Saka Zaren Taɗa Kai | |||||
| Na ciki zaren | Zaren waje
| Tsawon | Ƙimar jagora domin karba rami diamita | Mafi ƙarancin zurfin rijiyar burtsatse don ramukan makafi | |
A | KUMA | P | B | L | T |
M2 | 4.5 | 0.5 | 6 | 4.2 zuwa 4.3 | 8 |
M2.5 | 4.5 | 0.5 | 6 | 4.2 zuwa 4.3 | 8 |
M3 | 5 | 0.5 | 6 | 4.7 zuwa 4.8 | 8 |
M3.5 | 6 | 0.75 | 8 | 5.6 zuwa 5.7 | 10 |
M4 | 6.5 | 0.75 | 8 | 6.1 zuwa 6.2 | 10 |
M5 | 8 | 1 | 10 | 7.5 zuwa 7.6 | 13 |
M6 (a) | 9 | 1 | 12 | 8.5 zuwa 8.6 | 15 |
M6 | 10 | 1.5 | 14 | 9.2 zuwa 9.4 | 17 |
M8 | 12 | 1.5 | 15 | 11.2 zuwa 11.4 | 18 |
M10 | 14 | 1.5 | 18 | 13.2 zuwa 13.4 | ashirin da biyu |
M12 | 16 | 1.5 | ashirin da biyu | 15.2 zuwa 15.4 | 26 |
M14 | 18 | 1.5 | ashirin da hudu | 17.2 zuwa 17.4 | 28 |
M16 | 20 | 1.5 | ashirin da biyu | 19.2 zuwa 19.4 | 26 |
M18 | ashirin da biyu | 1.5 | ashirin da hudu | 21.2 zuwa 21.4 | 29 |
M20 | 26 | 1.5 | 27 | 25.2 zuwa 25.4 | 32 |
M22 | 26 | 1.5 | 30 | 25.2 zuwa 25.4 | 36 |
M24 | 30 | 1.5 | 30 | 29.2 zuwa 29.4 | 36 |
M27 | 34 | 1.5 | 30 | 33.2 zuwa 33.4 | 36 |
M30 | 36 | 1.5 | 40 | 35.2 zuwa 35.4 | 46 |
Girman Inci Nau'in nau'in 302 Saka Zaren Taɗa Kai | |||||
Zaren ciki | Zaren waje
| Tsawon | Mafi ƙarancin zurfin rijiyar burtsatse | ||
UNC | UNF | KUMA | P | B | T |
4-40 | 4-48 | 5 | 0.5 | 6 | 8 |
6-32 | 6-40 | 6 | 0.75 | 8 | 10 |
8-32 | 8-36 | 6.5 | 0.75 | 8 | 10 |
10-24 | 10-32 | 8 | 1 | 10 | 13 |
1/4-20 | 1/4-28 | 10 | 1.5 | 14 | 17 |
5/16-18 | 5/16-24 | 12 | 1.5 | 15 | 18 |
3/8-16 | 3/8-24 | 14 | 1.5 | 18 | ashirin da biyu |
7/16-14 | 7/16-20 | 16 | 1.5 | ashirin da biyu | 26 |
1/2-13 | 1/2-20 | 18 | 1.5 | ashirin da biyu | 28 |
5/8-11 | 5/8-18 | 20 | 1.5 | ashirin da biyu | 27 |
Matakan Shigar samfur
Shigarwa da hannu:
Yi amfani da kayan aikin shigar da zare na musamman. Koma zuwa hoton da ke ƙasa don takamaiman hanyar aiki. Ƙarshen kayan aiki a cikin adadi shine shugaban kusurwa huɗu wanda za'a iya haɗa shi tare da maƙallan taɓawa da hannu.
Shigar da Wutar Lantarki
1. Matsayi da workpiece daidai, sabõda haka, hakowa da inji -spindle axially layi daya da juna ƙarya (kada ku karkata) .Machine zuwa daidai dunƙule zurfin daidaitawa (kimanin. 0.1 zuwa 0.2 mm karkashin workpiece surface).
2. Inji mai aiki lever actuate. Lokacin da ka fara screwing a, rota tebur m hannun riga na kayan aiki dole ne ya kasance daidai da abin da ake iya gani a waje tasha fil sabõda haka, daga cikin wadannan clockwise tare da - aka dauka.
3. Ƙara saka zaren bugun kai da kai zuwa kayan aiki (Ramin ko yankan rami bisa ga ƙasa) kuma kunna 2 zuwa 4 na dogon lokaci.
4. Lever mai aiki na inji ya ci gaba da aiki kuma ya ɗauki kayan aiki tare da kai Jagoran zaren bugun kai da kai a cikin rami har sai da zaren tapping ɗin kai ya shiga cikin rijiyar burtsatse. Ana ci gaba da juyawa ba tare da kunna abinci ba.
5. Canjawa a baya (dangane da nau'in kuma an gina na'urar ta atomatik ta amfani da madaidaicin iyaka ko mai gano zurfin). Hard saukowa na kayan aiki a kan workpiece guje wa kowane farashi; in ba haka ba akwai
Hadarin karyewa don kayan aiki da saka zaren taɓa kai. Bugu da kari, matsattsen matsi mara-wasa na saka zaren bugun kai ya lalace kuma an rage karfin fitar da shi. Ana iya buƙatar daidaita saurin screwing zuwa saurin da ake buƙata lokacin juyawa.
