Saka zaren taɓa kai
307 jerin Kai tapping zaren saka tare da yankan rami
337 jerin abubuwan shigar da zaren kai-tsaye don ramukan makafi
An tsara jerin 337/338 na musamman don amfani a cikin yanayin da ba a yarda da yanke ya fada cikin rami ba, don haka ramukan yankan guda uku ramukan makafi ne. Don flanges sunan lambar shine 337/338H. Idan an rufe ƙarshen ƙasa, ana amfani da lambar 357/358.
Siffofin saka zaren taɓa kai:
1. Saka zaren taɗa kai yana da ikon bugun kai da cire guntu ta atomatik, kuma kayan tushe baya buƙatar taɓawa.
2. Saka zaren bugun kai yana da babban filin lamba tare da ƙãre samfurin kuma zai iya tsayayya da ƙarfi mai ƙarfi. Ana iya amfani da ƙananan ƙarfin kayan aiki a ƙirar samfur.
3. Matsakaicin dunƙulewa da kai yana da tasirin gyarawa akan zaren uwar da ya karye, kuma ta yin amfani da madaidaicin dunƙule dunƙulewa na iya ci gaba da amfani da wannan dunƙule.
4. Ƙarƙashin zaren zaren kai tsaye yana da kyakkyawan iska da juriya, wanda zai iya hana sassautawa da inganta ƙarfin haɗin gwiwa tare da kayan tushe.
5. The kai tapping thread saka shigarwa yana da sauƙi da sauri, yana buƙatar kayan aiki guda ɗaya kawai, tare da ƙananan farashi kuma kusan babu lahani.
Siffofin saka zaren taɓa kai
| Sunan samfur | 337 jerin Saka zaren danna kai |
| Kayan abu | Karfe Zn/SUS303/Na musamman |
| Launin saman | Galvanized/ Launi na halitta |
| Galvanizing: rawaya/blue/mai launi | |
| Nau'in zaren | Abubuwan da aka bayar na Metric, Inc., UNF |
| Lambar Samfura | M3-M24/Na musamman |
| Aiki | Majalisar, haɗin zaren / ɗaure / juyawa |
| Gwajin dogaro | Mechanical dimentions, gwajin taurin. gwajin jimrewar gishiri |
Teburin girma na 337 jerin abubuwan da aka saka da zaren kai da kai
| Lambar samfurin | Ma'auni Zare | Na waje Zare | Jimlar Tsawon | KUSA RAMIN DIAMETER | Zurfin Ramin Mine | |||
| d1 | d2 | P | L | Hasken allo RM C. Iron Filastik | Hasken allo RM C. Iron Filastik na hannu | Hasken Haske RM>350 C.Iron> 200HB Brass | ||
| 3370030... | M3 | 5 | 6 | 4 | 4,6-4,7 | 4,7-4,7 | 4,7-4,8 | 6 |
| 3380030... | 6 | 8 | ||||||
| 3370035... | M3.5 | 6 | 8 | 5 | 5,5-5,6 | 5,6-5,6 | 5,6-5,7 | 7 |
| 3380035... | 8 | 10 | ||||||
| 3370040... | M4 | 65 | 8 | 6 | 6,0-6,1 | 6,1-6,1 | 6,1-6,2 | 8 |
| 3380040... | 8 | 10 | ||||||
| 3370050... | M5 | 8 | 1 | 7 | 7,4-7,5 | 7,5-7,6 | 7.6-7,7 | 9 |
| 3380050... | 10 | 13 | ||||||
| 3370060... | M6 | 10 | 125 | 8 | 9,3-9,4 | 9,4-9,5 | 9,5-9,6 | 10 |
| 3380060... | 12 | 15 | ||||||
| 3370080... | M 8 | 12 | 15 | 9 | 11,1-11,2 | 11,2-11,3 | 11,3-11,5 | 11 |
| 3380080... | 14 | 17 | ||||||
| 3370100... | M 10 | 14 | 15 | 10 | 13,1-13,2 | 13,2-13.3 | 13.3-13,5 | 13 |
| 3380100... | 18 | ashirin da biyu | ||||||
| 3370120... | M 12 | 16 | 175 | 12 | 15,0-15,1 | 15,1-15,2 | 15.2-15,4 | 15 |
| 3380120... | ashirin da biyu | 26 | ||||||
| 3370140... | M14 | 18 | 2 | 14 | 17,0-17,1 | 17,1-17,2 | 17,2-17,4 | 17 |
| 3380140... | ashirin da hudu | 28 | ||||||
| 3370160... | M 16 | 20 | 2 | 14 | 19,0-19,1 | 19,1-19,2 | 19,2-19,4 | 17 |
Misali don nemo lambar labarin:Zaren da aka yi amfani da kai da kai Saka FH zuwa Matsayin Ayyuka 302 1 tare da zaren ciki A = M5 da aka yi da harsashi mai taurare, zinc plated da shuɗi mai shuɗi: 307.000.050.110
Haƙuri:ISO 2768-m
Zare:
Zaren ciki A: kamar yadda ISO 6H
Zaren waje E: kamar yadda daidaitattun FH
Kayayyaki
| Labari mai lamba. (rukuni na hudu na lambobi)........110 | Labari mai lamba. (rukuni na hudu na lambobi)........110 |
| Karfe-taurara, Zinc-nickel plated, m passivated | Labari mai lamba. (rukuni na hudu na lambobi)........143 |
| Case-taurara karfe, Zinc plated, rawaya chromated | Labari mai lamba. (rukuni na hudu na lambobi).......160
|
| Bakin karfe 14301 | Labari mai lamba. (rukuni na hudu na lambobi).......400 |
| Bakin karfe 14305 | Labari mai lamba. (rukuni na hudu na lambobi).......500 |
| Bakin Karfe 14401 | Labari mai lamba. (rukuni na hudu na lambobi)...... .600 |
| daga 3.7035 | Labari mai lamba. (rukuni na hudu na lambobi).......700 |
| Brass
| Labari mai lamba. (rukuni na hudu na lambobi).......800
|
Matakan Shigar samfur
Shigarwa da hannu:
Yi amfani da kayan aikin shigar da zare na musamman. Koma zuwa hoton da ke ƙasa don takamaiman hanyar aiki. Ƙarshen kayan aiki a cikin adadi shine shugaban kusurwa huɗu wanda za'a iya haɗa shi tare da maƙallan taɓawa da hannu.
Shigar da Wutar Lantarki:
1. Matsayi da workpiece daidai, sabõda haka, hakowa da inji -spindle axially layi daya da juna ƙarya (kada ku karkata) .Machine zuwa daidai dunƙule zurfin daidaitawa (kimanin. 0.1 zuwa 0.2 mm karkashin workpiece surface).
2. Inji mai aiki lever actuate. Lokacin da ka fara screwing a, rota tebur m hannun riga na kayan aiki dole ne ya kasance daidai da abin da ake iya gani a waje tasha fil sabõda haka, daga cikin wadannan clockwise tare da - aka dauka.
3. Ƙara saka zaren bugun kai da kai zuwa kayan aiki (Ramin ko yankan rami bisa ga ƙasa) kuma kunna 2 zuwa 4 na dogon lokaci.
4. Lever mai aiki na inji ya ci gaba da aiki kuma ya ɗauki kayan aiki tare da kai Jagoran zaren bugun kai da kai a cikin rami har sai da zaren tapping ɗin kai ya shiga cikin rijiyar burtsatse. Ana ci gaba da juyawa ba tare da kunna abinci ba.
5. Canjawa a baya (dangane da nau'in kuma an gina na'urar ta atomatik ta amfani da madaidaicin iyaka ko mai gano zurfin).
Hard saukowa na kayan aiki a kan workpiece guje wa kowane farashi; in ba haka ba akwai haɗarin karyewar kayan aiki da saka zaren taɓa kai. Bugu da kari, Matsatsin matsi mara-wasa na saka zaren bugun kai ya lalace kuma an rage karfin fitar da shi. Ana iya buƙatar daidaita saurin screwing zuwa saurin da ake buƙata lokacin sauya lokacin juyawa.
