Ho kenya khoele ea mohala
Mocheso o phahameng oa tinned le terata e sa khoneng ho bola e kentsoeng
Mocheso o phahameng oa tinned le terata e sa khoneng ho bola e kentsoeng
Monyetla o moholo ka ho fetisisa oa ho kenya khoele ea tšepe e entsoeng ka tšepe ke khanyetso e ntle ea kutu, hobane ho hanyetsa kutu ho na le litlhoko tse phahameng haholo, ho ka nahana ka ho kenya khoele ea tšepe e entsoeng ka tšepe. Wire khoele kenya, e tsejoang hape e le khoele sheath, terata sleeve, ke ho kenya ntshetswa pele ho sireletsa non-ferrous tšepe khoele masoba, ke mofuta o mocha oa ka hare khoele fastener, a loketse bakeng sa khokahanyo threaded, screw le fasten ka lesoba threaded ea e mong oa. likarolo tse hokahaneng, tse etsang khoele e tloaelehileng ea ka hare, ebe o phunya bolt (kapa screw) ho eona. Ke 'mele o harelaneng oa khoele o kang oa selemo o entsoeng ka terata ea tšepe e sa hloekang ea taemane. E sebelisoa haholo-holo ho matlafatsa le ho sireletsa khoele ea ka hare ea thepa e tlaase ea matla, ho felisa liphoso tsa tlhahiso ea khoele, ho ntlafatsa matla a ho hokahanya, ho fokotsa ka katleho phello ea ho amoheloa ha khoele e sa lekaneng le ho thothomela ho thibelang ho sisinyeha, le ho lelefatsa bophelo ba masoba a khoele.
Mesebetsi ya ho tiisa bokahodimo
Mesebetsi e ka sehloohong ea ho tiisa holim'a metsi e kenyelletsa anti-corrosion, chebahalo, ho ntlafatsa ts'ebetso ea tjheseletsa le ts'ebetso ea motlakase.
Anti-corrosion: Lera la tin le ka thibela ka katleho bokaholimo ba tšepe e sa hloekang hore bo se ke ba senyeha, ka ho etsa lera la metsoako e matla le holim'a tšepe e sa hloekang, ho sireletsa tšepe e sa hloekang ho tsoa ho oxidation le lintho tse ling tse senyang.
E ntle: bokaholimo ba tšepe bo sa hloekang bo na le ponahalo e ntle, e fetohile thepa ea bohlokoa ea mokhabiso, e ka ntlafatsa ponahalo ea tšepe e sa hloekang.
Ts'ebetso e ntlafetseng ea ts'ebetso ea ho cheselletsa mocheso o phahameng oa ho hanyetsa: ka lebaka la thepa e ntle ea soldering ea thini, tšepe e sa hloekang holim'a tšepe e ka etsa hore e tiee sebakeng se lokelang ho chesetsoa, sena se bohlokoa haholo bakeng sa tlhahiso ea mechine le likarolo tse ling tse hlokang. ho hanyetsa mocheso o phahameng.
Lisebelisoa tsa motlakase: bokaholimo ba tšepe bo sa hloekang bo ka ba le thepa e ntle ea motlakase, e etsa hore e be thepa ea bohlokoa e sebelisoang indastering ea elektroniki, ho tloha ho likarolo tsa elektronike ho ea ho li-capacitor le libeteri le lihlahisoa tse ling tsa elektroniki li hloka ho sebelisa tinning ea holimo.
Ntle le moo, ho roala ka thini ho boetse ho sebelisoa haholo indastering ea elektronike e le sekoaelo se sireletsang le se rekisoang bakeng sa likarolo tsa elektroniki, terata, boto ea potoloho e hatisitsoeng le li-block tsa potoloho tse kopaneng ka lebaka la ho hanyetsa ha eona ho hoholo le ho cheseha.
Wire Thread Insert Parameters
Lebitso la sehlahisoa | Ho kenya khoele ea mohala |
Lintho tse bonahalang | SUS304/SUS316/SUS321/InX750/Brass/Customized |
Mmala wa bokahodimo | Ha ho na / Eco-friendly plating |
Ho roala ka holim'a metsi | Silevera/tin/cadmium/zinc/other |
Mofuta oa khoele | Metric,Inc UNC, UNF |
Metric Size | M1.4*0.3P～M85*6.0P |
Inch UNC boholo | 1-64~11/2"-6 |
Boholo ba Inch UNF | 4-48~11/2"-12 |
Tekanyetso ea tlhahiso | MS21209/DIN8140/N926/ITN32760/MO-44421 |
Kenya khoele ea mohala Lenane la paramethara ea lintlha tse tloaelehileng
Diameter | Pitch | d | (Journale ea Melao) | Bit bophara | |
(d) | (P) | (etsa) | |||
Metric | |||||
M1.6 | 0.35 | 1d/1.5/2d/2.5d/3d | 2.08-2.18 | 1.7 | |
M2 | 0.4 | 1d/1.5/2d/2.5d/3d | 2.60–2.80 | 2.1 | |
M2.5 | 0.45 | 1d/1.5/2d/2.5d/3d | 3.30–3.50 | 2.6 | |
M3 | 0.5 | 1d/1.5/2d/2.5d/3d | 3.80–4.00 | 3.2 | |
M4 | 0.7 | 1d/1.5/2d/2.5d/3d | 5.05–5.25 | 4.2 | |
M5 | 0.8 | 1d/1.5/2d/2.5d/3d | 6.35–6.60 | 5.2 | |
M6 | 1 | 1d/1.5/2d/2.5d/3d | 7.60 ho isa ho 7.85 | 6.3 | |
M7 | 1 | 1d/1.5/2d/2.5d/3d | 8.65–8.90 | 7.3 | |
M8 | 1.25 | 1d/1.5/2d/2.5d/3d | 9.85–10.10 | 8.4 | |
M10 | 1.25 | 1d/1.5/2d/2.5d/3d | 12.10–12.50 | 10.4 | |
M11 | 1.5 | 1d/1.5/2d/2.5d/3d | 13.10–13.50 | 11.5 | |
M12 | 1.75 | 1d/1.5/2d/2.5d/3d | 14.40 ho isa ho 14.80 | 12.5 | |
Intshi | |||||
2-56 (0.086) | 0.435 | 1d/1.5d/2d/2.5d | 2.7 ho isa ho 2.9 | 2.4 | |
4-40 (0.112) | 0.635 | 1d/1.5d/2d/2.5d | 3.6 ho isa ho 4.0 | 3.1 | |
5-40 (0.125) | 0.635 | 1d/1.5d/2d/2.5d | 4.0 ho isa ho 4.4 | 3.4 | |
6-32 (0.138) | 0.794 | 1d/1.5d/2d/2.5d | 4.5 ho isa ho 4.9 | 3.8 | |
8-32 (0.164) | 0.794 | 1d/1.5d/2d/2.5d | 5.2 ho isa ho 5.6 | 4.4 | |
10-24 (0.190) | 1.058 | 1d/1.5d/2d/2.5d | 6.2 ho isa ho 6.6 | 5.2 | |
12-24 (0.216) | 1.058 | 1d/1.5d/2d/2.5d | 6.8–7.2 | 5.8 | |
1/4"-20 | 1.27 | 1d/1.5d/2d/2.5d | 8.0–8.4 | 6.7 | |
5/16"-18 | 1.411 | 1d/1.5d/2d/2.5d | 9.7-10.2 | 8.4 | |
3/8"-16 | 1.588 | 1d/1.5d/2d/2.5d | 11.5–12.0 | 10 | |
Mekhoa e meng ea phekolo ea holim'a metsi ea ho kenya khoele ea mohala
Bakeng sa lisebelisoa tse kentsoeng ka terata ea tšepe tse entsoeng ka tšepe e sa hloekang ea 304, liphekolo tse fumanehang kaholimo ke:
1. Ha ho phekolo, bokaholimo ba tlhaho
2. Mebala e nang le tikoloho ea tikoloho, ho latela litlhoko tsa bareki e ka kenngoa ka pherese, e tala, e putsoa, e khubelu. Liindastering tseo ho tsona ho hlokahalang hore ho kenngoe lithapo tse ngata tse kentsoeng ka likhoele, lithapo tse kentsoeng ka mebala li thusa ho tseba hore na li kentsoe kapa che. Mebala e fapaneng ea lisebelisoa tse kentsoeng ka terata e boetse e loketse haholo bakeng sa tsamaiso ea pono.
3. Cadmium plating, cadmium (cd) plated steel terata threaded kenya corrosion resistance, lubrication, wear resistance, conductivity ea motlakase, electromagnetic properties, ho hanyetsa mocheso ho matla.
4. Lihlahla tse entsoeng ka tšepe tse entsoeng ka silevera, tse entsoeng ka silevera, li ka kenngoa ka har'a lisebelisoa tse fapaneng tsa likhetla, ho kenyelletsa le li-alloys tsa magnesium, li-alloys tsa aluminium le lisebelisoa tse thibelang mocheso, haholo-holo tse sebelisetsoang ho fokotsa likhoele tsa screw sebakeng sa mocheso o phahameng. phello ea tlamahano.
5. Ho kenya likhoele tsa tšepe tse entsoeng ka thini, tse entsoeng ka tin-plated li na le molemo o moholo ka ho fetisisa oa ho hanyetsa kutu, hobane ho hanyetsa ha kutu ho na le litlhoko tse phahameng, u ka nahana ka ho roala ka tin-plated ea likhoele tsa tšepe tsa tšepe.
6. Omisa filimi lubrication bakeng sa kutu e bonolo kapa tikoloho ea mocheso o phahameng.
