Faka intambo yocingo
Ifilimu eyomile yokugcoba okokufaka okufakwe imicu yensimbi
Ifilimu eyomile yokugcoba okokufaka okufakwe imicu yensimbi
Ifilimu eyomile yokufaka intambo yentambo yokuthambisa isetshenziswa ezindaweni ezigqwala kancane noma ezinezinga lokushisa eliphezulu. Izithambisi zefilimu eyomile zinezinhlayiya ezincane ezimiswe kugcobo oluqinile ku-organic binder noma i-inorganic binder, njenge-molybdenum disulfide noma i-polytetrafluoroethylene.
Zisetshenziswa endaweni yensimbi ngaphandle kwamafutha ngendlela yefilimu (5μm~ 20μm). Ngokukhetha ngokucophelela izithasiselo nezincibilikisi ezifanele, izithambisi ezikhethekile ezifanele ukusetshenziswa kwezimboni eziningi cishe ku-315°C zingenziwa. I-ultra-high-high-coating lubricant coating ingasetshenziswa ezimweni zokushisa eziphezulu ezingu-425°C. izintambo zentambo ye-bokcoil zingasetshenziswa nge-lubricant yefilimu eyomile ezimeni ezingaqediwe noma ngemva kokwelashwa kokumbozwa kwe-chromium ukuze kuvikelwe ukugqwala okukhulu.
I-Wire Thread Insert Parameters
| Igama lomkhiqizo | Faka intambo yocingo |
| Okubalulekile | SUS304/SUS316/SUS321/InX750/Ithusi/Eyenziwe ngokwezifiso |
| Umbala ongaphezulu | Akukho / I-Eco-friendly Plating |
| Ukumboza ubuso | Isiliva/ithini/cadmium/zinc/enye |
| Uhlobo lomucu | I-Metric,Inc UNC, UNF |
| Usayizi Wemethrikhi | M1.4*0.3P～M85*6.0P |
| Intshi UNC Usayizi | 1-64~11/2"-6 |
| Intshi UNF Usayizi | 4-48~11/2"-12 |
| Izinga lokukhiqiza | MS21209/DIN8140/N926/ITN32760/MO-44421 |
Faka uchungechunge lwezintambo Uhlu lwepharamitha yokucaciswa okujwayelekile
| Ububanzi | Iphimbo | d | (Iphephabhuku Lemithetho) | I-diameter encane | |
| (d) | (P) | (yenza) | |||
| Imethrikhi | |||||
| M1.6 | 0.35 | 1d/1.5/2d/2.5d/3d | 2.08-2.18 | 1.7 | |
| M2 | 0.4 | 1d/1.5/2d/2.5d/3d | 2.60-2.80 | 2.1 | |
| M2.5 | 0.45 | 1d/1.5/2d/2.5d/3d | 3.30-3.50 | 2.6 | |
| M3 | 0.5 | 1d/1.5/2d/2.5d/3d | 3.80-4.00 | 3.2 | |
| M4 | 0.7 | 1d/1.5/2d/2.5d/3d | 5.05–5.25 | 4.2 | |
| M5 | 0.8 | 1d/1.5/2d/2.5d/3d | 6.35-6.60 | 5.2 | |
| M6 | 1 | 1d/1.5/2d/2.5d/3d | 7.60-7.85 | 6.3 | |
| M7 | 1 | 1d/1.5/2d/2.5d/3d | 8.65-8.90 | 7.3 | |
| M8 | 1.25 | 1d/1.5/2d/2.5d/3d | 9.85-10.10 | 8.4 | |
| M10 | 1.25 | 1d/1.5/2d/2.5d/3d | 12.10-12.50 | 10.4 | |
| M11 | 1.5 | 1d/1.5/2d/2.5d/3d | 13.10–13.50 | 11.5 | |
| M12 | 1.75 | 1d/1.5/2d/2.5d/3d | 14.40-14.80 | 12.5 | |
| Intshi | |||||
| 2-56 (0.086) | 0.435 | 1d/1.5d/2d/2.5d | 2.7-2.9 | 2.4 | |
| 4-40 (0.112) | 0.635 | 1d/1.5d/2d/2.5d | 3.6-4.0 | 3.1 | |
| 5-40 (0.125) | 0.635 | 1d/1.5d/2d/2.5d | 4.0-4.4 | 3.4 | |
| 6-32 (0.138) | 0.794 | 1d/1.5d/2d/2.5d | 4.5-4.9 | 3.8 | |
| 8-32 (0.164) | 0.794 | 1d/1.5d/2d/2.5d | 5.2-5.6 | 4.4 | |
| 10-24 (0.190) | 1.058 | 1d/1.5d/2d/2.5d | 6.2-6.6 | 5.2 | |
| 12-24 (0.216) | 1.058 | 1d/1.5d/2d/2.5d | 6.8-7.2 | 5.8 | |
| 1/4"-20 | 1.27 | 1d/1.5d/2d/2.5d | 8.0-8.4 | 6.7 | |
| 5/16"-18 | 1.411 | 1d/1.5d/2d/2.5d | 9.7-10.2 | 8.4 | |
| 3/8"-16 | 1.588 | 1d/1.5d/2d/2.5d | 11.5-12.0 | 10 | |
Okunye ukwelapha okungaphezulu kokufakwa okufakwe intambo
Okufakwayo okucushwe ngocingo lwensimbi okwenziwe ngensimbi engagqwali engu-304, ukwelashwa okungaphezulu okutholakalayo yilezi:
1. Akukho ukwelashwa, indawo yemvelo
2. Ukufakwa kombala ovumelana nemvelo, ngokwezidingo zamakhasimende kungafakwa ngokunsomi, okuluhlaza okotshani, okuluhlaza okwesibhakabhaka, okubomvu. Ezimbonini lapho kudingeka khona inani elikhulu lokufakwa okunentambo, okokufaka okufakwe imicu yezintambo ezinombala kusiza ukukhomba ukuthi kufakiwe noma cha. Imibala ehlukene yokufaka intambo yocingo nayo ilungele ukuphathwa okubonakalayo.
3. I-Cadmium plating, i-cadmium (cd) insimbi enezintambo ezinentambo ifaka ukumelana nokugqwala, ukuthambisa, ukumelana nokugqokwa, ukuguquguquka kukagesi, izakhiwo zikagesi, ukumelana nokushisa kunamandla.
4. Imicu yensimbi ecwecwe ngesiliva ingafakwa ezinhlobonhlobo zezinto zegobolondo, okuhlanganisa ama-alloys e-magnesium, ama-alloys e-aluminium kanye nokugqwala nezinto ezimelana nokushisa, ezisetshenziselwa kakhulu ukunciphisa izintambo zesikulufu esimweni sokushisa okuphezulu. umphumela wokuhlanganisa.
5. Ukufakwa kwezintambo zensimbi ezifakwe uthayela, okufakwe ngothayela kunenzuzo enkulu yokumelana nokugqwala okungcono, ngoba ukumelana nokugqwala kunezidingo eziphezulu, ungacabangela ukumbozwa kwezintambo zensimbi zensimbi.
6. Ukugcoba ifilimu okomile ukuze kugqwale noma izinga lokushisa eliphezulu.
